Skip to main content
All CollectionsAccount and SecuritySecurity
A Step-by-Step Walkthrough to ModelCentro ID Verification
A Step-by-Step Walkthrough to ModelCentro ID Verification

Ensure a smooth account setup with this guide through the essential ID verification process on ModelCentro

Rebecca Mitchell avatar
Written by Rebecca Mitchell
Updated over 2 weeks ago

In order to validate your account on ModelCentro, the ID verification process necessitates your attention and a few specific steps. Please ensure you have electronic copies of your ID and a web camera connected to your computer to proceed.

Here’s a step-by-step guide to assist you in passing the ID verification:

  1. Sign In:

    • Navigate to the ModelCentro website and sign in.

  2. Access Account Details:

    • Click on 'Me' at the top of any page.

    • Select 'Account Holder Details'.

  3. Complete the Form:

    • Diligently fill in all fields within the form.

  4. Upload ID:

    • Click 'Upload file' under the Government Issued ID section, and upload photos of your ID. (Note: If utilizing an ID card, you do not need to upload the third page).

  5. Snapshot for Verification:

    • Click 'Take a snapshot' to capture a photo of your face alongside the ModelCentro website and your ID.

  6. Capture or Upload Snap:

    • Use the camera icon to take a snapshot or upload an existing image from your computer.

  7. Submit Photos:

    • If satisfied with the snapshot, click 'Submit photo'; otherwise, click 'Try again' to retake.

  8. Finalize Submission:

    • Click 'Submit' to send your profile for verification.

Following submission, the status of the form should reflect "Account pending verification" with an indication of the submission date.

Upon review and verification by our team, the status will transition to "Account was verified" and, for security reasons, all provided information will be concealed.

Should the form raise any suspicions, contain unclear photos, or be rejected for any reason, the status will display "Account verification failed. Please review form errors." Error-riddled fields will be highlighted in red. In this scenario, adhere to the instructions, thoroughly rectify the form, and click "Re-Submit".

While the account approval on ModelCentro typically transpires within 24 hours or less following your submission for approval, you need not idle during this brief wait period.

Even before your account gains approval, an array of preparative steps and enhancements can be undertaken on your site. This means you can begin sculpting your site’s design, uploading content (though publishing is restricted pre-approval), configuring Join and Tip options, crafting blog posts, and more.

We appreciate your compliance with these steps, ensuring your ModelCentro account is verified and secure for professional use. If you encounter any issues or have queries, our team is readily available to assist you!


Short on Time? Check These Q&A:

  • Why is account verification needed?
    To confirm your identity, comply with legal requirements, and keep the platform secure.

  • Where can I find the verification form?
    You can access the verification form by signing into ModelCentro, clicking on ‘Me’ at the top of the page, and selecting ‘Account Holder Details.’ The form is located within this section.

  • Can I use previously taken photos for verification?
    Yes, you can uploas previously taken photos.

  • How long does the verification process take, and will I be notified?
    It usually takes up to 24 hours. You’ll be notified once it's approved or if corrections are needed.

  • What types of IDs are accepted?
    Government-issued IDs like passports, driver’s licenses, and ID cards.

  • What if my verification is rejected?
    If your verification fails, your status will display "Account verification failed." The system will highlight errors in red. Carefully review the issues, correct them, and resubmit the form.

  • Can I start setting up my site while waiting for verification?
    Yes, you can design your site and upload content, but publishing is restricted until approval.

Did this answer your question?